The Matrix wood insert defines the new standards for contemporary look and performance. This appliance looks like a fireplace, but has all the advantages of an insert. It’s faceplate and blower assembly were developed to allow a flush finish with the masonry fireplace. The blower assembly (90 CFM) is equipped with a heat sensor and a switch that can be set to automatic, manual or OFF position.
Cast iron was selected as the material of choice for this clean and modern unit. Installation into larger openings is facilitated by the use of an optional sheet metal backing plate. This wonderful insert will surely become the focal point of the room.
Fuel type : Dry cordwood
Recommended heating area (sq.ft.) : () 750 – 2,100
Firebox volume (cu. ft.) : 2.4
Maximum burn time : () 8 h
Maximum heat output (dry cordwood) : (2) 75,000 BTU/h (22.0 kW)
Overall heat output rate (min. to max.) : (2) (3) 12,500 BTU/h (3.7 kW) to 31,300 BTU/h (9.2 kW)
Average overall efficiency (EPA cribs / Douglas fir) : (3) 69.5 % (HHV) (4) 75.2 % (LHV) (5)
Average overall efficiency (dry cordwood) : (3) N.A. (HHV) (4) N.A. (LHV) (5)
Optimum efficiency : (6) (7) 77.2 %
Average particulate emissions rate : (8) 3.9 g/h
Average CO : (9) 137.4 g/h